P11000 10.8kVA Single Phase Diesel Generator with AMF

Description

P Series Compact Generators

Reliable Mobile and Backup Power

The P Series range delivers dependable power in a compact, rugged design built for both mobile and standby applications. Available in diesel and petrol configurations from 4 to 18 kVA, these generators are engineered to perform in demanding environments while remaining easy to transport, operate and maintain.

Designed with a focus on durability and user convenience, the P Series incorporates air- and water-cooled engines running at 3000 RPM, delivering strong performance across residential sites, commercial operations and construction environments. Its efficient acoustic insulation keeps noise levels low, making it ideal for locations where quiet operation is essential.

A reinforced baseframe with fork pockets and a single lifting point supports safe, effortless handling. Service access is simplified with side doors and an opening roof, reducing downtime during maintenance. The P Series also supports a wide range of power distribution options, including 230V IP66 and 3P+N+T socket configurations, allowing easy integration into existing site setups.

Optional upgrades such as AMF panels, remote start, lockable fuel caps, site trailers, and enhanced electrical protections make it adaptable to a variety of operational requirements.

Combining compact size, low noise, and proven engine technology, the P Series stands as a practical, reliable choice for anyone needing stable power, whether for planned operations or unexpected outages.

P11000 – 10.8 kVA Single Phase

The P11000 single phase diesel generator with AMF is supplied with the Pramac AMF automatic mains failure panel included, and delivers 10.8 kVA / 9.7 kW limited-time standby power and 10.0 kVA / 9.0 kW continuously at 230V, 50Hz single phase, 0.9 power factor. It runs a water cooled Yanmar 3TNV70-HGE engine, 854 cm³, naturally aspirated with mechanical governor at 3000 RPM, and electric start on a 12V circuit. The alternator is class H insulated, IP23 protected, two pole, with capacitor voltage regulation.

The 24 litre tank runs 7.87 hours at 75% load and 6.05 hours at 100%, and noise sits at 68 dB(A) at 7 metres with a guaranteed sound power level of 96 dB(A) – low enough for residential areas or work outside normal hours. At 325 kg dry and 1400 x 650 x 975 mm it stays compact for its output. Outlets are two 2P+T CEE 230V 16A IP44 sockets and one 2P+T CEE 230V 32A IP44 socket, protected by a circuit breaker and isometer protection (IPP). The MCP manual control panel carries a keyed off/on/start selector, voltmeter, hourmeter, low oil pressure alarm lamp and oil pressure indicator.

Frequently Asked Questions

How can the P Series generator be moved and handled?

The P Series is easy to transport, thanks to the forkable baseframe and the single lifting point. The side door/opening roof allows for easy and fast servicing.

What optionals are available for the P Series?

The AMF panel is included with this listing (it is an optional extra on other P Series sets). The panel allows control of all the generator’s functionalities. It permits the transfer of the load on the generator in the event of a mains failure. Conversely, as soon as the AMF system detects the power grid, it stops the generator.

Also available as optional extras: lockable fuel cap, site trailer, remote start/stop device, differential or isometer protection.

Which are the most suitable applications for the P Series?

The robust and compact design makes the P Series the number one choice as an entry level generator for mobile applications. Thanks to the sturdy design and low noise, they are the perfect generators for larger work sites and residential areas where low noise level is a priority.

How long will the P11000 run on a full tank?

The 24 litre tank gives 7.87 hours at 75% load, or 6.05 hours at 100% load, using 3.05 litres per hour at 75%.

Is an automatic mains fail (AMF) switch included?

Yes. This listing is supplied with the separate Pramac AMF automatic control panel, part number PY000A0000S, a wall mounted unit that plugs into the generator CONN connector on an 8 metre control lead. It monitors the mains and, when the supply fails, starts the generator and transfers your load through its interlocked mains and generator contactors, then switches back and stops the set once the mains returns. The panel uses a Tecnoelettra AT206 control and protection module with mains voltage, generator voltage, frequency and hour meter readouts, a programmable automatic test run, emergency stop button, audible alarm, battery charger and external start/stop capability, with shutdowns for generator voltage out of limits, battery voltage out of limits, low oil pressure, fail to start and external shutdown. It is wired for single phase 230 V or three phase 400 V (3P+N) supplies to suit this generator.