CTM25210-A00 Hotstart CTM Engine Heater 2500W 240V
$1,923.99 inc GST
CTM25210-A00 Hotstart HOTflow CTM 2500W 240V engine coolant heater – genuine Hotstart part, 3 m cord with no plug for hard wiring.
Description
CTM25210-A00 Hotstart CTM Engine Heater 2500W 240V to Suit 12 to 20 L Diesel Engines (HOTSTART)
The CTM25210-A00 engine heater is a Hotstart HOTflow CTM forced-circulation coolant pre-heater. Its built-in pump circulates warm coolant through the engine for even heating, so standby and prime generators start easily and take load sooner.
– Part number: CTM25210-A00 (HOTSTART)
– Type: HOTflow CTM forced-circulation coolant heater with integrated pump
– Power: 2500W (2.5 kW), 240V single phase, 10.7 A
– Thermostat: fixed, on at 38°C and off at 49°C
– Ports: 16 mm (0.625″) hose barb inlet and outlet
– Flow: 0.79 m³/hr at 21 kPa
– Heating fluid: 50/50 glycol and water engine coolant
– Protection: IP44, for weather-protected installations
– Cord: 3 m power cord with no plug, for hard wiring. This is the -A00 version, not the -E00 Europe-plug version
– Weight: 1.6 kg
– Suits: engines of 12 to 20 L
– Lead time: usually shipped within 2-3 days from date of order
Most generator engine heaters are hard wired, which is why we stock the -A00 version. If your current heater has a plug on its cord, simply swap the plug over from your existing heater. Contact us if you would like help confirming the right heater for your engine.
Technical Information
| Weight | 1.6 kg |
|---|---|
| Dimensions | 25 × 15 × 20 cm |
Brand
Hotstart
Hotstart designs and manufactures engine pre-heating solutions — coolant, oil and immersion heaters, in-block heaters, battery warmers, thermostats and control systems — that keep diesel and gas engines, generators and compressors ready to start in cold conditions. Oz Wide Power supplies the genuine Hotstart range Australia-wide.
You must be logged in to post a review.
Reviews
There are no reviews yet.