Hotstart

HOTSTART Plug Housing.

HOTSTART Hinged Flip Cover.

HOTSTART Female Connector (for extension cords) — Female Connector – for extension cords.

HOTSTART Flush Mount Kits for In-block Heaters — Flush Mount Kits for In-block Heaters.

HOTSTART TwinStat Thermocord for In-block Heaters — HOTSTART’s TwinStat Thermocord is an energy efficient, idle reduction heater cord ideal for fleet operations.

HOTSTART Thermocord for In-block Heaters — Thermocord for In-block Heaters.

Genuine HOTSTART in-block engine heaters. Each heater installs directly into a core (freeze) plug, threaded plug or plate opening in the engine block to heat the coolant for faster cold starts, reduced engine wear and lower start-up emissions. All models are 240 V and supplied complete with a 2-wire w/ground 6 ft (1.8 m) HPN cord and plug. Select the correct part number for your engine make and model from the fitment table below — if you are unsure which heater suits your engine, contact us and we will confirm the right part.

HOTSTART Battery Wrap Replacement Straps — Adjustable replacement straps for securing battery thermal wraps.

HOTSTART Thermostat & Y-Cord Assembly — Thermostat & Y-Cord Assembly.

HOTSTART BW Battery Thermal Wrap – UL Recognized (NEMA) — UL Recognized thermostatically controlled battery thermal wraps provide optimum heating regardless of ambient temperature.

HOTSTART KB Battery Heating Pad — Battery heater not recommended for nickel cadmium batteries.

HOTSTART PS252 Oil Pressure Switch — For automatic cut-off of heaters when the engine starts.